• Supply Voltage: 230V 50Hz supplied with IEC 320 fused mains lead
• Power Consumption: 400W
• Line In: Input impedance: 1k + or – input to ground,
• Sensitivity: -20dBU typical
• Microphone: Input impedance: 1k + or – input to ground,
• Sensitivity: -42dBU typical, Phantom power for electret microphones: 12V selectable (on/off)
• Outreach: Input impedance: >10k, Sensitivity: 0dBU typical.
• Outreach power: 24V dc nom. available via outreach connector (100mA max.) Loop Type: True current mode,
• Loop output voltage: 14V, Loop drive current @ 1 ohm: 11A
• Line Out: 775mV output
• Fault Relay: Single pole double throw (SPDT): NC, Common, NO.
• Metal Compensation: Up to 10dB / octave design counteracts frequency dependent absorption by metal in the installation
  over a bandwidth of approximately 5kHz.
• Maximum Coverage Area: 1000m², i.e., rooms up to 31m x 31m
• Loop impedance: 0.5 to 2 ohms
• Frequency Response (-3dB): 100Hz to 5kHz; Distortion: Less than 1 % typical; Signal to Noise Ratio: Better than –65dB any input; AGC Range (3dB change in output voltage current): 10dB. AGC ratio: 20:1.
• Sensitivity Level Controls: Line Input, Microphone, 12V
• Phantom, Outreach, Metal Comp, Loop Drive.
• Display & Controls: LED display with 4 membrane control buttons
• Connectors: Microphone: 3-pin XLR, Line In: 3-pin XLR, Loop: 2-way binding post, Outreach 4-way pluggable connector, Line Out 3-way pluggable connector, Fault Relay 3-way pluggable connector, 230V ac connector
• Dimensions: 67H x 218W x 280D mm
• Weight: 2.38kg
   

Comes with 100m cable and audio tester

This product is available to hire on a daily or weekly rate (weekly rate = 3 x daily hire charge).

 

Price shown is the daily list price excluding VAT, please contact us for trade discounts.

Detailed manufacturer information can be found here (opens an external link)

Download the user manual here